Jiangsu Biaoxin Machinery Co., Ltd.
What is toothpaste making machine ?
BXZRH homogenizer mixer is a vacuum mixing system for the manufacture of viscous emulsions and suspensions in the cosmetics, pharmaceuticals, food and chemicals industries. It`s the most advanced mixer homogenizers design fromEuropeand is especially suitable for making big batches of cream and emulsions with big quantity powders.
What is toothpaste making machine made of?
BXZRH vacuum mixer homogenizer is usually made of main mixer homogenizer, oil phase mixer, water phase mixer, vacuum system, hydraulic lifting system, materials circulation system, heating and cooling system, temperature control system, electrical control panel etc.
The main mixer homogenizer is composed of a high speed high shear homogenizer mounted from the bottom of the vessel, wall scraper and two fixed propellers with holes. The bottom homogenizer consists of one three-layer toothed rotor and one two-layer toothed stator. An external circulation pipe comes along the tangent of rotor and connects to the top edge of the tank body.
The oil and water phase mixers have exactly the same construction. There`s a high speed disperser mounted from the top of the cover which helps dissolve the ingredients. Some customers will omit the oil and water phase mixers and keep the main mixer homogenizer only.
How does toothpaste making machine work?
During the mixing operation, the outer anchor agitator rotates clockwise slowly. With the attached Teflon blades, the materials are scraped off the vessel wall and move upwards so they won`t always stick to the wall and burn.
At the same time the two fixed impellers keep still and give the materials a counterforce and drive the cream downward into the high speed homogenizing and emulsifying zone. The cream goes through the holes on the paddles and increases mixing effect.
Because of the two opposite forces by fixed impellers and wall scraper, the cream rolls over the vessel from top to bottom and back to top repeatedly. When the cream is completely mixed, the heat from the jacket is quickly transferred to every part through the inside wall.
The heart of vacuum mixer homogenizer is bottom homogenizer (emulsifier) which consists of one three-layer toothed rotor and one two-layer toothed stator. The design is different from the homogenizer in vacuum mixer homogenizers BXZRJ series and is much better.
The rotor is connected with homogenizing motor by a synchronous belt with the shaft ratio of 1:1.2. The ABB or Siemens motor rotates at the speed of 3000rpm and drives the rotor to rotate up to 3600rpm producing strong suction force.
The materials go into the rotor from top opening of the homogenizer and are cut, sheared, emulsified and homogenized through the shear gap between the rotor and stator. Then they`re accelerated to jet out through the pipeline along the tangent of the rotor. The cream runs inside the external circulation pipe and goes back to mixing tank for the slow mixing or another emulsification and homogenization.
The above two types of slow and high forces repeat and repeat. And the cream circulates through the pipeline and is completely mixed, dispersed, emulsified and homogenized.
Water ring type vacuum pump (–0.097Mpa) is powerful to pull out the bubbles generated during mixing, dispersing and homogenizing. It also helps transfer the ingredients from the oil and water phase mixers to the main vacuum mixer homogenizer. The small quantity perfumes are also sucked by vacuum to avoid dust.
Oil hydraulic pump is used to lift the cover of main vacuum mixer homogenizer. Safety devices are equipped to guarantee that the mixing part won`t start when the cover is lifted.
Typical applications of toothpaste making machine
Cosmetics & Toiletries: cream, lotion, toothpaste, wax, mascara, gel
Pharmaceuticals: ointment, dental composite, syrup, injection
Food: mayonnaise, dressing, jam, butter, margarine, wasabi